Cub Cadet 19B70029100 Manual De Instalación página 2

Installing the Mulch Plug
1. Install the grasscatcher pin (711-
040609) and nut (712-04064) onto
the front eyelet of the mower deck,
as shown in Figure 1-4.
Figure 1-4
2. Pivot the chute deflector upward
and remove the protective cover
from the pin found on the deck's
surface. See Figure 1-5.
1
2
Figure 1-5
To order replacement parts, call the Customer Dealer Referral Line at 1-877-282-8684
or visit www.cubcadet.com to find the nearest Cub Cadet dealer in your area.
3. To install the mulch plug, position
the rear of the mulch plug over the
pin found on the deck's surface.
Refer to Figure 1-6.
Figure 1-6
4. Place the end of the chute strap
(723-04008A) over the grasscatcher
pin (711-040609) to secure the mulch
plug.
Important: Be certain that the
bottom edge of the mulch plug is
installed on the inside of the lip of
the deck opening, as shown in Figure
1-7.
Figure 1-7
5. Slide the mulch plug wire (747-
06686) over the pin on the deck's
surface, position the washer (736-
0159) over the wire, and secure the
mulch plug with the wing knob
(720-04122). See Figure 1-8.
NOTE: Make sure that the wing knob is
snug, and the wire is positioned inside
the lip of the deck to keep the mulch plug
securely in place. See the inset in Figure
1-8.
Figure 1-8