Changing The Batteries; Troubleshooting - Powerfix Profi Z30225 Instrucciones De Utilización Y De Seguridad

Move the On / Off switch
switch on the LEDs
Note: The LED bulbs
Point the precision engineer's LED magnifying glass
with the LED lamps
Release the alligator clips
work piece.
Move the On / Off switch
switch off the LEDs

Changing the Batteries

Pull the battery compartment cover
the arrow to remove it from the battery compartment
Take out the old batteries.
Place the new batteries
the battery compartment
Note: Ensure the correct polarity. This is shown in the
battery compartment
Push the battery compartment cover
opposite direction to the arrow back in order to close the
battery compartment

Troubleshooting

= Problem
= Cause
= Solution
Use / Troubleshooting
into position "ON" to
9
.
20
are non-replaceable.
20
at the clamped work piece.
20
in order to remove the
18
into position "OFF" to
9
.
20
of type 1.5 V
21
.
4
.
4
.
4
in the direction of
3
, AAA into
back in the
3
GB/MT
1
.
4
47