Troubleshooting; Protecting The Environment - BLACK&DECKER ASI300 Manual De Instrucciones

Troubleshooting

Problem Possible cause
Appliance will Pressure setting
not start. may be below the
actual pressure.
The fuse in the 12
Volt adaptor is
blown.
Pointer is in
contact with the
needle indicator.
Cord is not
plugged in
Cord or switch is
damaged.

Protecting the environment

Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your Black & Decker product
needs replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials.
Local regulations may provide for separate collection of
electrical products from the household, at municipal waste
sites or by the retailer when you purchase a new product.
Service
Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
Whether you need technical advice, repair, or genuine
factory replacement parts, contact the Black & Decker
location nearest you.
Possible solution
Adjust the pressure
setting pointer to a
higher setting.
Turn it off and then
turn it on.
Replace the adaptor
and cord.
Adjust the pressure
setting pointer to a
higher setting.
Turn it off and then
turn it on.
Plug the tool into a
working outlet.
Have the cord or switch
replaced at a Black &
Decker Service Centre
or Authorized Service
Centre.
Technical data
Voltage
AR, B2C, B2
B3, BR
Input voltage
Input current
Pressure (max)
Weight
ENGLISH
ASI300
220V
120V/127V
12V
A 0.5/0.9/8
Kpa / psi / bar 1103/160/11.03
kg 1,93
11