Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
To replace the front cover lense remove lens cassette by moving locks toward center (fig.6) and lift up the lens cassette
to remove/replace the front lens cover.
REPLACING INSIDE CLEAR LENS: Replace the inside clear lens if it is damaged. Place your fingernail in recess below
cartridge view window and flex lens upwards until it releases from edges of cartridge view window.
CHANGE THE SHADE CARTRIDGE: Remove ADF holder assembly from helmet shell. See fig.6 for removal. Flex top end
of the ADF holder to allow for ADF cartridge to be removed from frame. Install new ADF cartridge into frame per fig.7
below. Make sure that the ADF cartridge is inserted in ADF holder correctly as shown. Install ADF holder assembly into
helmet shell.
TECHNICAL SPECIFICATIONS
Optical Class 1 / 1 / 1 / 2
Viewing Area
97x62mm (3.82"x2.44")
Cartridge Size
133x114x9mm (5.25"x4.50"x0.35")
Arc Sensor 4
Light State
DIN 3.5
Dark State DIN 5 ~ 8 / 9 ~ 13
Shade Control
Internal, Variable Shade
Power On/Off
Fully Automatic
Sensitivity Control
Low — High, by infinitely dial knob
UV/IR Protection
Up to Shade DIN16 at all times
Power Supply
Solar cell. Battery change required, 2×CR2450 lithium battery
Switching Time
1/25,000 s. from Light to Dark
Oxyfuel Gas Welding
Yes
Oxygen Cutting
Yes
Delay (Dark to Light)
0.1~ 1.0 s by dial control knob
Low Amperage TIG Rated ≥ 2 amps (DC); ≥ 2 amps (AC)
Grinding
Yes
Operating Temp.
-10°C ~ +55°C (14°F ~ 131°F)
Storing Temp.
-20°C ~ +70°C (- 4°F ~ 158°F)
MAINTENANCE
5
EN
ES
DE
FR
GR
PL
PT
RO
Publicidad
Tabla de contenido
