Rack Kit Contents - Dell RapidRails Guia De Instalacion

Rack Kit Contents

The rack kit includes the following items (see Figure 1-1):
• One pair of mounting rails with rotating brackets
NOTE:
You can configure the sliding rail assemblies as either RapidRails or VersaRails using the rotating brackets.
• One cable tray
• One cable-management arm
• One cable-management arm retainer
• One status indicator cable (if applicable)
• Eight 10-32 x 0.5-inch flange-head Phillips screws
NOTE:
The nonmetric screws described in illustrations and in procedural steps are identified by size and number
of threads per inch. For example, a #10 Phillips-head screw with 32 threads per inch is identified as a 10-32 screw.
Figure 1-1. Rack Kit Contents
1
1 mounting rails
4 cable tray and tie-wraps
8
Rack Installation Guide
6
2 10-32 x 0.5-inch flange-head Phillips
screws (8) (VersaRails only)
5 cable-management arm
2
3
4
5
3 status indicator cable
(if applicable)
6 cable-management arm
retainer