Cleaning, Care & Maintenance - COOL HEAD RC200 Manual De Instrucciones

Cleaning, Care & Maintenance
Before cleaning, switch off the cabinet and disconnect from the mains.
The cabinet should be kept clean using a mild soap solution. Do not use abrasive cleansers. The plastic parts cannot withstand
boiling water (max. temperature +85 °C).
When regular cleaning is performed, be sure to wipe clean the rubber door gasket to ensure any sticky substances are removed that
GB
would otherwise damage the gasket.
The condenser fan air outlet above the compressor must be free of leaves, paper etc. to ensure normal operation of the cabinet.
The condenser on the back of the cabinet must be regularly cleaned as well. This is best done with a vacuum cleaner and a brush
Routine maintenance
Switch off and disconnect from the power supply before cleaning.
•
•
•
•
•
•
• Always wipe dry after cleaning with soft cloth.
• Take care when cleaning the rear of the appliance.
• An agent or qualified technician must carry out repairs if required.
•
refrigerating compartment and clean thoroughly. Please leave the door open to avoid the development of odor and mildew.
Special maintenance
Periodic Operations
•
•
•
•
•
• The key to the electrical cabinet should be kept out of the reach of children and users.
•
ssible.
These can leave harmful residues. Use only mild soapy water.
y.
ponents.
appliance after having turned the switch to OFF position, empty the
leaner or soft brushes).
order.
denser.
14
nel, cable or plug to get wet.
liance.