Publicidad
Idiomas disponibles
Idiomas disponibles
Warning for the user
a) In order to ensure the highest level of protection,
the helmet must fit snugly, the fastening device
must always be used, and correctly adjusted in line
with the instructions for use.
b) The helmet is designed in such a way that part of
the power of an impact is absorbed by the partial
damage of the helmet skin, the protective padding,
or both. This damage may not be visible, so after
an impact, every helmet should be withdrawn from
use and replaced by a new helmet.
c) No changes may be made to a helmet. Changes to
the helmet skin or the strap system compromise
safety and could lead to a reduction in protective
effectiveness!
d) It is important that the helmet and its components
are regularly inspected for signs of wear and tear,
and if necessary replaced.
e) The helmet should be replaced no later than 7
years after the date of manufacture due to material
ageing. The date of manufacture can be found on
the inside of the shell.
f) The protection offered by the helmet depends on
the circumstances of the accident, but wearing a
protective helmet may not always prevent a fatal
accident, a longer period of disability or injuries.
g) All materials used are free from materials which
may irritate the skin or endanger health. However,
if an undesired reaction shown occur in the user,
please stop using the helmet.
h) The indication of the helmet weight +/- 50 g is
on the inside of the helmet.
i) This head protector has only been developed for
use in equestrian activities. Although this helmet
meets the standard of VG1. 01.040 2014-12, no
head protector can protect the wearer from all
possible influences. Under certain circumstances,
driving or riding accidents can result in death or
serious injury.
EU Declaration of Conformity:
https://www.busse-reitsport.de/downloads/official/
declarations/Konformitaetserklaerung_BUSSE_
Reithelm_COLMAR_signiert_2020-12-21.pdf
Publicidad
