Windows Vista - TRENDnet TPL-402E Guía De Instalación Rápida

Windows Vista

1. Go into the Control Panel, click Network and
Internet, click Network and Sharing Center, click
Manage Network Connections and then right-click
the Local Area Connection icon and then click
Properties.
Windows XP/2000
1. Go into the Control Panel, double-click the Network
Connections icon and then right-click the Local
Area Connection icon and then click Properties.
4. I have a HomePlug 1.0 or HomePlug Turbo network. Can I use this with my network?
The TPL-402E is not backwards compatible with HomePlug 1.0 or HomePlug Turbo.
5. Do I need to reconfigure my TPL-402E after I hit the reset button?
No, the TPL-402E should automatically establish connection once both units are reset to
default settings.
If you still encounter problems or have any questions regarding the TPL-402E/TPL-402E2K,
please refer to the User's Guide included on the Utility CD-ROM or contact TRENDnet's Technical
Support Department.
2. Click Internet Protocol Version 4(TCP/IPv4)
and then click Properties. Then click on Obtain
an IP address automatically.
2. Click Internet Protocol (TCP/IP) and then click
Properties. Then click on Obtain an IP address
automatically.
7