Marantz professional PHANTOM PACK Guia Del Usuario página 3

Setup
Items not listed under
To set up Phantom Pack with your sound system:
1. Use the included power cable to connect Phantom Pack to a power outlet.
2. Use standard XLR cables to connect your microphones to the mic inputs.
Note: Most dynamic microphones do not require phantom power, while most condenser
microphones do. Consult your microphone's documentation to find out whether it needs
phantom power.
3. Use standard XLR cables to connect the outputs to your mixer, audio interface,
loudspeakers, etc.
4. Power on Phantom Pack.
5. Power on all of your other audio devices (mixer, audio interface, loudspeakers, etc.). Power
on your loudspeakers last.
This is an example of a basic way to use Phantom Pack.
Rear
Panel
Introduction Box Contents
Front
Panel
Power Outlet
are sold separately.
Microphones
Mixer
3