FOR COOLING
Allow your unit to acclimate to room temperature before making initial settings.
When the switch is on " " the DuctStat
1. Perform Operation Settings in the environment in which the DuctStat
2. Plug in the DuctStat
and set the switch to " ".
®
3. Set the Differential to 3°.
4. Plug the device you want to control into the DuctStat
5. Turn the knob counterclockwise until the knob reaches the stop. DO NOT FORCE.
6. Move the switch to " ". You should see/hear the device that is plugged into the DuctStat
7. Move the switch to " ". At this point the device plugged into the DuctStat
8. Slowly turn the knob clockwise, until the device plugged into the DuctStat
STEP 8
Turn clockwise until
the device turns on.
9. Slowly turn the knob counterclockwise, until the device plugged into the DuctStat
10. The DuctStat
is now set to turn on when the temperature drops. If you would like the DuctStat
®
This will turn the device on and off with a larger on/off differential.
IMPORTANT NOTE
To shorten the length of time that your device continues to run after the warming or cooling air has shut off, rotate the knob control slightly further, as in Step 9.
Should you experience frequent On/Off cycling, move the Differential switch to the 7° position.
ONE YEAR LIMITED WARRANTY
Subject to the following limitations, the manufacturer warrants to the original purchaser that each new product is free from defects in material and workmanship and
agrees to repair or replace under this warranty any defective product or part as follows from the original date of purchase for a period of one (1) year.
THIS WARRANTY IS NOT TRANSFERABLE AND DOES NOT COVER:
1. Products sold damaged or incomplete, sold "as is", sold reconditioned or used as rental equipment.
2. Delivery, installation or normal adjustments explained in the owner's manual.
3. Damage or liability caused by shipping, improper handling, improper installation, incorrect voltage or improper wiring, improper maintenance, improper modification, or
the use of accessories and/or attachments not specifically recommended by the manufacturer.
4. Repairs necessary because of operator abuse or negligence, or the failure to install, operate, maintain and store the product according to the instructions in the owner's
manual.
5. Damage caused by cold, heat, rain, excessive humidity, corrosive environments and materials, or other contaminants.
6. Expendable items that become worn during normal use.
7. Freight costs from customer to vender.
8. Repair and transportation costs of products or parts determined not to be defective.
9. Any incidental, indirect or consequential loss, damage, or expense that may result from any defect, failure or malfunction of the product. Some states do not allow the
exclusion or limitation of consequential damages so the above exclusions or limitations may not apply to you. Some states do not allow the exclusion or limitations on how
long an implied warranty lasts, so the above limitations may not apply to you. You may have other rights which vary from state to state.
A defective unit must be returned, prepaid, with proof of purchase, well packaged to avoid damage in transit. Ship unit to Suncourt Inc. only after obtaining a Return
Goods Authorization (RGA) number. Returns without this RGA number will not be accepted.
Actual product appearance may differ from illustrations.
Suncourt reserves the right to modify any or all of its products' features, designs, components and specifications without notice.
SUNCOURT INC.
P.O. Box 40
Durant, IA 52747-0040
1.800.999.FANS (3267)
www.suncourt.com
will turn ON as it senses cooler air (temperature drop).
®
®
.
®
STEP 9
Turn counterclockwise until
the device turns off.
is being used. For use with forced air systems, make sure the blower is not running.
turn on.
®
will turn off.
®
turns ON.
®
turns OFF.
®
to have a wider range, simply switch the Differential to 7°.
®
Function switch selections:
: to stop operation of the device.
: for continuous running of device.
: for automatic on with temperature rise.
: for automatic on with temperature drop.
The rotary knob selects the automatic on/off setting for heating or cooling.
The Differential switch provides control over on/off cycling.