Axis Ip Utility - Axis Q7414 Guia De Instalacion

Page 8

AXIS IP Utility

AXIS IP Utility automatically discovers and displays Axis devices on your network. The application
can also be used to manually assign a static IP address.
Note that the computer running AXIS IP Utility must be on the same network segment (physical
subnet) as the AXIS Q7414.
Automatic discovery
1. Check that the AXIS Q7414 is connected to the network and that power has been applied.
2. Start AXIS IP Utility.
3. When the AXIS Q7414 appears in the window, double-click an entry to open the home page for
that video input. AXIS Q7414 appears in the window with one entry for each of its four video
inputs.
4. See page 10 for instructions on how to assign the password.
Set the IP address manually (optional)
1. Acquire an unused IP address on the same network segment as your computer.
2. Select one of the AXIS Q7414s in the list.
3. Click the button
4. Click the Assign button and follow the instructions.
5. Click the Home Page button to access the video encoder's web pages.
6. See page 10 for instructions on how to set the password.
Assign new IP address to selected device and enter the IP address.
AXIS Q7414 Installation Guide