Chapter 1 : Introduction - Analog way RKD8044-T Manual De Usuario

Chapter 1 : INTRODUCTION

1-1. SUPPLIED EQUIPMENT
• 1 RKD8044-T Remote Console (RKD8044-T).
• 1 AC Power supply cord.
• 1 REMOTE cable (DB9 M/F) 3 m / 10 ft.
• 1 "UPDATE" cable (DB9 F/F) 1.8 m / 6 ft.
NOTE: Take care of this cable, it is essential for updating the RKD8044-T. (See Chapter 5 : UPDATING THE
RKD8044-T).
• 1 User's manual.
1-2. GENERAL INFORMATION
RKD8044-T enables to control the powerful iX range of Seamless Switchers: DIVENTIX 2
1-3. iX2 FAMILY REFERENCES
REFERENCES
RKD8044-T
RKD8044
DVX8044
OPT-8044-VO
OPT-8044-A
CBD-8044
RCS 10142
AMS100
ARC100
1-4. INSTALLATION
• Table top mounting:
IMPORTANT:
WARNING:
RKD8044-T
RKD8044-T
RKD8044-T Remote Console with T Bar for controlling Diventix2
RKD8044 Remote Console for controlling Diventix2
™
Di-VentiX II .
Optional VIDEO output.
Optional AUDIO input/output.
™
CROSS BLENDER . Optional version for "Edge blending" application.
Remote Control Software (Supplied)
Axion Manager Show Control Software
Axion Show Control Console
The RKD8044-T can be used directly on a table: the unit is equipped with 4 plastic feet.
• • • • Be sure that no weight in excess of 2 kg (4.4 Lbs.) is added onto the RKD8044-T.
• • • • The maximum ambient operating temperature must not exceed 40 °C (104 °F).
• • • • The rack and all mounted equipment in it must be reliably grounded to national and
local electrical codes.
ALWAYS SET THE T-BAR TO THE BOTTOM POSITION BEFORE SWITCHING ON OR
OFF THE RKD8044-T.
DESIGNATIONS
RKD8044-T
PAGE 5