Stobag SKIMY SRCW 06T Instrucciones Y Advertencias Para El Instalador página 74

5.2.1) Programming: new event NEW
Table 23 Programming a simple "new event" (example 1 in table N. 22):
Press key ■ repeatedly a number of times until Auto starts flashing.
1.
2. Press key
3. Press key
4. Press key
5. Press key
6. Press key
7. Press key
8. Press key
9. Press key
10. Press key
11. Press key
12. Press key
(in the example: only Mo=Monday).
13. Press key
14. Press key
15. Press key
(in the example: no special "
16. Press key
(in the example: no special "holiday"
17. Press key
(in the example: no special "planetary time"
18. Press key
(in the example: no special "timed"
19. Now all the parts of the selected event start flashing to indicate that the
programming of the new event has been completed.
Press key
With the last confirmation the event is memorized and SRCW 06T is ready for programming another new event; you can
proceed starting from step N. 5 in this table.
74
3 times to select the Prog "programming" mode.
to confirm the "programming" mode.
to confirm the programming of "events" .
to confirm the programming of a "new event" NEW.
or ▼ to set the hours
(in the example: 08).
to confirm the hours.
or ▼ to set the minutes (in the example: 30).
to confirm the minutes.
or ▼ to choose the day of the week
to select the day of the week.
to confirm the day of the week
to select the "Up" command for group 1.
to confirm the command
(in the example: "Up" for group 1 ).
to confirm the event (in the example: no special
" or "
to confirm the event
command).
to confirm the event
to confirm the event
command).
to confirm the event or press key ■ to go back to an earlier stage.
(in the example: Mo=Monday).
").
command).
Example
... Auto
or
or
or
www.stobag.com