Maintenance - OMGAN CE-CN-1800 Manual Del Usuario

NOTE: Never place empty cookware on the appliance.
3. Press the On/Off
4. Press either the HEAT
indicator light comes on.
NOTE: If you wish to maintain a constant temperature during cooking, use the TEMP settings. To cook
at a specific power level, use the HEAT settings.
5. Press the UP or DOWN
at any time during the cooking process.
The default is 270°F / 132.2°C.
The default is 1300 W / 120V, 1600 W / 240V.
6. Press the TIMER
7. Press the UP or DOWN
increments up to a maximum of 150 minutes, which then counts down in 1 minute increments.
NOTE: During cooking the time can be changed at any time. The HEAT/TEMP settings remain
unchanged.
8. A beep will sound when the cooking time has finished, and the appliance switches to standby mode.
9. After cooking is completed, press the ON/OFF
Notice:
1. The power will completely shut off with 9 second if either;
- the wrong type of cookware is applied
- no cookware is placed on the unit.
2. If the unit be used for 150 minutes under the TEMP or HEAT state, the LED display will show EE code and
sound, and then turn off automatically.
3. The Max Timer is 150 minutes per operation.
CLEANING
• Clean after each use. Turn Off, Disconnect plug from power source, and wait until unit has cooled down
before cleaning.
• If the pots/pans are used without being cleaned, this may result in discoloration or stains.
• Do not use benzene, thinner, scrubbing brush or polishing powder to clean any surface on induction
button to turn the appliance on.
or TEMP button, depending on your cooking requirements. The corresponding
buttons repeatedly to reach the desired setting. This setting can be changed
button: '0' appears on the display.
buttons repeatedly to set the cooking time. The time can be set in 5 minutes
button again to turn off the unit.

Maintenance

7
Operation