Chauvet DJ Slim PAR PRO TRI Guía De Referencia Rápida página 4

SlimPAR™ Pro Tri QRG
AC Power
Power Linking
Fuse
Replacement
Mounting
Product
Mounting
Diagram
This product has an auto-ranging power supply that can work with an input
voltage range of 100
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
For the maximum number of SlimPAR™ Pro Tri products that you can
power link at each voltage, see the User Manual or the sticker on the product.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the
Double-bracketed
Bracket for Floor or
Overhead Mounting
240 VAC, 50/60 Hz.
~
Safety
4
Notes.
Bracket Adjustment
Knob
EN