Switching The Alarm On/Off; Stopping The Alarm; Auto Standby - Yamaha TSX-B15 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

■ Switching the alarm on/off

Alarm
indicator
(
)
RADIO indicator
Operations during playing back alarm sound
At the set time, alarm sound plays back. During playback, operations below are available.

■ Stopping the alarm

Alarm
indicator
(
)
RADIO indicator

Auto Standby

The system automatically enters standby mode under the following circumstance.
• No audio signal is input from a connecting device or when the connecting device is playing at a low volume
for a certain period (about 20 minutes).
• If no operation is performed for more than 8 hours while music is being played back or stopped.
• Disconnect the Bluetooth connection from the Bluetooth device.
Press ALARM.
When the alarm is on, the alarm indicator (
and the RADIO indicator light and the alarm time is
displayed for a while.
Press ALARM or
.
y
• Unless you stop the alarm, the alarm stops after
60 minutes automatically.
• When you stop the alarm, the alarm time setting, etc., is
saved for convenient use next time.
• Press any button except ALARM and
beeping, and twice to stop the radio source (snooze
function). 4 minutes after the radio source is stopped, it
will start fading in again and after another minute the
beeping will resume.
• When the snooze function is activated, the display, alarm
indicator (
) and RADIO indicator flash.
BASIC FUNCTIONS
)
once to stop the
5
En

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Tabla de contenido