Snap-On MIG225Ai Manual De Instrucciones página 4

Risk of Explosion
Welding causes sparks that can cause explosion.
Use caution and proper procedures when
welding.
Avoid sparks if gasoline vapor and other fuels
are present.
Electrical shock, flames and explosion can cause
serious injury.
Electrical and Magnetic Fields
Welding may cause localized electrical and mag-
netic fields araund cables and power sources.
The magnetic fields created by high currents
may affect the operation of medical equipment.
Route the electrode and work cables together.
Do not place your body between the elec-
trode/torch and work cables.
Never coil the electrode/torch lead around
your body.
Do not work next to welding/cutting power
source.
Electrical shock and Magnetic fields can cause
injury.
Disposal of Equipment
IMPORTANT
Disposal of electrical equipment can be hazard-
ous to the environment.
Contact local regulations prior to disposal.
Improper disposal can cause an environmental
hazard.
FUMES AND GASES can be dangerous to your
health.
SAFETY INFORMATION cont'd
ITEMS REQUIRED FOR MIG WELDING WHICH ARE
NOT PROVIDED WITH THE MIG225i.
1. Full cover welding helmet with proper colored lens
(shade 9 to 11, depending on operator's preference).
2. Proper shielding gas and cylinder.
3. Leather welding gloves.
4. 230 volt single phase AC power.
5. Other personal protective equipment, which may vary
to match the welding being performed.
SAVE THESE INSTRUCTIONS
4