Black and Decker BLC18750DB Manual Del Usuario página 5

4. Press ST RT/STOP button and blender will begin running. Display will show
countdown in 1-second increments and blender will automatically stop once
time has run down.
5. If longer blending is required, simply press
time desired. Then ST RT/STOP button again.
Note: To run blender longer than 60 seconds or if mixture needs more blending
once blender has stopped, press
press ST RT/STOP button to resume blending.
Important: If SPEED is selected first and then TIME is selected, visual display will
show the time countdown as blender runs. Otherwise, countdown will not be
shown.
TO USE PULSE (K)
This is useful for blending tasks such as grinding coffee
beans or nuts, or when blending thick mixtures.
1. Press
suits your task. Digital display will show the number
of the speed selected.
K
2. Press and release MODE button to select PULSE. The
red indicator light will be illuminated above PULSE.
3. Press and hold ST RT/STOP button for no more than 5 seconds. Release and
press again until food has desired consistency. Releasing ST RT/STOP button
automatically turns blender off.
4. llow several seconds between pulses.
Note: Use PULSE button to begin blending process when preparing beverages that
include ice cubes; this helps to produce smoother texture.
5. Once mixture is ready for continuous blending, press and release MODE
button to select TIMER. Press
running time.
6. Press ST RT/STOP button and blender will begin running. Display will show
countdown in 1-second increments and blender will automatically stop when
time has run down.
TO USE CRUSH (L)
Use to crush up to 1½ cups ice cubes to a fine crush in
just 10 seconds.
1. Press
your task. Crush up to 1 cup from speed 12-18. Crush
1½ cups from speed 15-18. Digital display will show
number of speed selected.
2. Press and release MODE button to select CRUSH. The
L
red indicator light will be illuminated below CRUSH.
3. Press ST RT/STOP button. Two ice cubes will flash on digital display while
blender is running on this function.
4. Blender will continue to run until ST RT/STOP button is depressed again.
7
/ buttons to select additional
button to select additional time desired and
/ buttons to select the speed that best
/ buttons to select desired amount of
/ buttons to select speed that best suits
TO DD FOODS WHILE THE BLENDER IS RUNNING
Open lid cap to add ingredients while blender is running.
Drop or pour ingredients through opening. (M)
Important: Do not remove lid while blender is running.
CUPS OZS
M
BLENDING TIPS ND TECHNIQUES
• Cut food into pieces no larger than ¾-inch for use in blender.
• When preparing foods that have several different kinds of ingredients, always
add liquid ingredients first.
• When ingredients splatter onto sides of jar or mixture is very thick, press
ST RT/STOP button to turn appliance off. Remove lid and use a rubber spatula
to scrape down sides of the jar and to redistribute food, pushing food toward
blades. Replace lid and continue blending.
Important: ppliance should always have cover in place when in use.
Caution: Do not place blender jar on base when motor is running.
• Lid cap holds up to 2 oz. of liquid and can be used
as a measure when adding ingredients such as juices,
milk, cream and liquor (N).
• When making bread crumbs, chopping nuts or
grinding coffee beans, make sure blender jar is
CUPS OZS completely dry.
N
• When using PULSE function, use short bursts.
blades to stop rotating between pulses. Do not use
pulse for more than 2 minutes.
• Use PULSE function to begin blending process when preparing beverages that
include ice cubes; this helps to produce a smoother texture. Once mixture
begins to come together:
o Set MODE to SPEED; select desired speed.
o Change MODE to TIMER; select desired running time.
o Press ST RT/STOP and let blender run.
• PULSE function is helpful when short bursts of power are needed, such as when
preparing thick smoothies or milkshakes, chopping nuts or grinding coffee
beans.
• It is helpful to begin blending process on lowest speed and then increase to
higher speeds, if necessary.
• To stop blending at any time, press ST RT/STOP.
llow
8