Mount The 3M-22 To Wall - Filtrete 3M-22 Manual De Instrucciones

Wall

Mount the 3M-22 to Wall

1. Hold the 3M-22 against the wall, with the wires coming over the 3M-22
top above terminal block. The 3M-22 will cover the hole in the wall.
2. Position 3M-22 for best appearance.
3. Attach the 3M-22 to the wall with the screws provided.
4. If you are mounting the 3M-22 to sheet rock or if you are using
the old mounting holes, use the plastic anchors provided.
Wires
5. Mark first and drill a 3/16-in.(4.8mm) hole for the insert at each
screw location, then mount the unit.
Place wires like this
Wall
anchor
Screw to wall
7
PG