Changing The Fuse In The Car Charger Adapter; Initial Operation Via The Mains Plug - Medion LIFE E69118 Manual De Instruccion

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Changing the fuse in the car
charger adapter
 Remove the car charger adapter from the
12/24 V
 Remove the USB cable if necessary.
 Open the fuse cover as shown.
 Replace the defective fuse with a new T2.5 Ah
/ 250V fuse and screw the cover back on.
CAUTION!
The fuse cover may be difficult to remove the first
time the fuse is changed.
Initial operation via the mains
plug
 Insert the required mains plug (VDE, USA, AUS or UK)
into the universal power charger.
 Now connect either a USB cable or the included USB
adapter cable to the USB port. Insert the desired adapter
plug to the adapter cable.
 Unplug the universal power charger from the mains
socket when the recharger is not in use.
6 - EN
socket in your vehicle.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Md 83053

Tabla de contenido