Publicidad
Idiomas disponibles
Idiomas disponibles
Your Copperhead helicopter has two fl ight modes: a basic mode for learning and another for more advanced fl ying. After
you have mastered basic fl ight commands and can comfortably fl y your helicopter in all directions and altitudes, you can
select the "ADVANCED FLIGHT MODE" by pushing the button on the lower right hand of the controller. The helicopter's
tail rotor will become more responsive to your FORWARD and BACKWARD commands. To return to the basic mode,
simply push the "ADVANCED FLIGHT MODE" button again.
PROBLEM
Controller doesn't work.
Helicopter does not respond.
Canopy
Battery Case
Tail Rotor Blade
Tail Fins
Tail Support
Tail Motor Set
© 2013 Estes-Cox Corp. All rights reserved.
4
CHECK
1. Controller's power switch is "OFF".
2. Controller's batteries installed improperly.
3. Controller's batteries depleted.
1. Controller not turned on.
2. Helicopter not turned on.
3. Antenna not extended fully.
4. Helicopter requires charging.
5. Helicopter is not armed.
Motor Frame
Connector Link
Gear A
PC Box
Helicopter Flight Modes
Troubleshooting
Safety Tips
PROBLEM
Helicopter does not lift off.
Helicopter lands too fast.
Spare Parts
Safety Tips
Landing Gear
Metal Frame Set
Flybar
Inner Rotor Shaft
LiPo Battery
Motor A
CHECK
1. Make sure the controller is turned "ON".
2. Make sure the helicopter is charged.
3. You are trying to fl y in strong or gusty winds.
1. Throttle stick pulled down too quickly.
2. Helicopter isn't fully charged.
Main Blades
Blade Grip Set
Gear B
Large Ball Bearing
Small Ball Bearing
Motor B
Tail Motor Set
Controller
USB Charge Cord
ESTE4603 v1.2
Publicidad
