Typical Installations - NuTone QTXEN Serie Manual Del Usuario

TYPICAL INSTALLATIONS

Housing mounted
to I-joists.
Housing mounted
anywhere between
I-joists
using
hanger bars.
Housing mounted
to joists.
Housing mounted
anywhere between
joists
using
hanger bars.
MODELS QTXEN050 • QTXEN080 •
Housing mounted
anywhere between
trusses using
hanger bars.
Housing mounted
anywhere between
trusses using
hanger bars.
PLAN THE INSTALLATION
6-IN. ROUND
*
DUCT
6-IN. ROUND
*
Purchase
ELBOW
separately
The unit will operate most quietly and efficiently when located
where the shortest possible duct run and minimum number of
elbows will be needed.
Use a roof cap or wall cap that has a built-in damper to reduce
backdrafts.
Plan to supply the unit with proper line voltage and appropriate
power cable.
QTXEN110 • QTXEN150
Page 2
*
ROOF CAP
*
WALL
*
CAP