NuTone QTXN Serie Manual Del Usuario
NuTone QTXN Serie Manual Del Usuario

NuTone QTXN Serie Manual Del Usuario

Calefactor / ventilador / luz / luz de noche
Ocultar thumbs Ver también para QTXN Serie:

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

QTXN SERIES
HEATER / FAN / LIGHT / NIGHT LIGHT
READ AND SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLING OR USING THIS HEATER.
To reduce the risk of fire, electric shock, or injury to persons, observe the
following:
1.
Use this unit only in the manner intended by the manufacturer. If you
have questions, contact the manufacturer at the address or telephone
number listed in the warranty.
2.
Before servicing or cleaning unit, switch power off at service panel and
lock the service disconnecting means to prevent power from being
switched on accidentally. When the service disconnecting means cannot
be locked, securely fasten a prominent warning device, such as a tag, to
the service panel.
3.
Installation work and electrical wiring must be done by a qualified
person(s) in accordance with all applicable codes and standards,
including fire-rated construction codes and standards.
4.
When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
5.
This heater is hot when in use. To avoid burns, do not let bare skin touch
hot surfaces. Keep combustible materials, such as furniture, pillows,
bedding, papers, clothes, etc. and curtains at least 3 feet (0.9 m) from
the front of the heater.
6.
Extreme caution is necessary when any heater is used by or near children
or invalids and whenever the heater is left operating and unattended.
7.
Do not operate any heater after it malfunctions. Disconnect power at
service panel and have heater inspected by a reputable electrician before
reusing.
8.
Do not use outdoors.
9.
To disconnect heater, turn controls to off, and turn off power to heater
circuit at main disconnect panel (or operate internal disconnect switch, if
provided).
10. Do not insert or allow foreign objects to enter any ventilation or exhaust
opening, as this may cause an electric shock or fire, or damage the
heater.
11. To prevent a possible fire, do not block air intakes or exhaust in any
manner.
12. A heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint, or flammable vapors or liquids are used or
stored.
13. Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
14. Install heater at least 6 inches from floor or any adjacent wall.
15. To avoid electrical shock: Do not install unit in a tub or shower enclosure
or any location where it may come in contact with water. Never place a
switch where it can be reached from a tub or shower.
16. This product is designed for installation in ceilings up to a 12/12 pitch. Duct
connector must point up. DO NOT MOUNT THIS PRODUCT IN A WALL.
17. Do not connect heater to dimmer switch or speed control.
18. Ducted fans must always be vented to the outdoors.
19. Provide a separate 20 AMP circuit. Use 12 GA. power cable of type which
meets code.
SAVE THESE INSTRUCTIONS
TYPICAL INSTALLATION
CEILING
JOIST, TRUSS,
OR I-JOISTS
CEILING
MATERIAL
Housing mounted directly to joists, trusses, or I-joists.
Up to 24-inches on-center.
PLAN THE INSTALLATION
6-IN. ROUND
*
DUCT
*
Purchase separately
Unit shown connected to 6-inch round ductwork.
The unit will operate most quietly and efficiently when located
where the shortest possible duct run and minimum number of
elbows will be needed.
Plan to supply the unit with proper line voltage and appropriate
power cable.
MODEL QTXN110HL
Page 1
POWER
MOUNTING
CABLES
CHANNELS
HOUSING
GRILLE
*
ROOF CAP
6-IN. ROUND
*
ELBOW
WALL
*
CAP

Publicidad

Tabla de contenido
loading

Resumen de contenidos para NuTone QTXN Serie

  • Página 1 MODEL QTXN110HL Page 1 QTXN SERIES HEATER / FAN / LIGHT / NIGHT LIGHT READ AND SAVE THESE INSTRUCTIONS IMPORTANT INSTRUCTIONS TYPICAL INSTALLATION READ ALL INSTRUCTIONS BEFORE INSTALLING OR USING THIS HEATER. To reduce the risk of fire, electric shock, or injury to persons, observe the CEILING following: POWER...
  • Página 2 MODEL QTXN110HL Page 2 INSTALLATION WARNING: To reduce the risk of fire, do not store 3. Attach or use gasoline or other flammable vapors and damper liquids in the vicinity of the heater. / duct connector CAUTION: High temperature, risk of fire, keep to housing.
  • Página 3 RATING SPECIFICATIONS grille mounting HEAT (2-position rocker) • The three-position screws from rocker switch is rated the sides of the NuTone 4-Function 5 A @ 125VAC. Use this 4-FUNCTION CONTROL housing. (See Control shown switch for Lights ONLY. 120 VAC LINE IN...
  • Página 4 MODEL QTXN110HL Page 4 OPERATION Before using heater, make sure heater has been properly installed according to installation steps under “INSTALLATION” on page 2. Use a 4-Function Control to operate the heater, fan, light, and night light separately. See “Connect Wiring” for details. NOTE: This unit is designed with a thermostat which senses excess heat and may start the blower automatically.
  • Página 5 This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties. To qualify for warranty service, you must (a) notify Broan-NuTone at the address or telephone number stated below, (b) give the model number and part identification and (c) describe the nature of any defect in the product or part.
  • Página 6: Service Parts

    MODEL QTXN110HL Page 6 SERVICE PARTS Key No. Part No. Description 97016470 Housing 98007763 Slide Channel (2 req.) 98003036 Support Angle (4 req.) 97016450 Duct Connector 99170245 Screw #8-18 X .375 (8 req.) 93260454 Nut, Sheet Metal #8-18 (Partition) (2 req.) 99260512 Nut, Sheet Metal #8-18 (Grille) (3 req.)
  • Página 7: Instrucciones Importantes

    MODELO QTXN110HL Página 7 SERIE QTXN CALEFACTOR / VENTILADOR / LUZ / LUZ DE NOCHE LEA Y CONSERVE ESTAS INSTRUCCIONES INSTRUCCIONES IMPORTANTES INSTALACIÓN TÍPICA LEA TODAS LAS INSTRUCCIONES ANTES DE INSTALAR O USAR ESTE CALENTADOR. Para reducir el riesgo de incendios, descargas eléctricas o lesiones personales, CABLES DE VIGA DE TECHO, observe las siguientes precauciones:...
  • Página 8: Instalacion

    MODELO QTXN110HL Página 8 INSTALACION ADVERTENCIA: Para reducir el riesgo de incendio, 3. Acople el no almacene ni use gasolina u otros vapores y conector del líquidos flamables en las cercanías del calentador. regulador PRECAUCIÓN: Temperatura alta, el riesgo de de tiro/con- incendio, mantenga los cables eléctricos, cortinas, ducto a la...
  • Página 9: Conexión Eléctrica

    CALENTADOR ROJO (interruptor 2-posición) • El interruptor de taje de la rejilla eje de balancín de NuTone control para de los lados de 4-funciones ilustrado CONTROL DE tres posiciones es la cubierta. (Vea 4 FUNCIONNES (comprar separado)
  • Página 10: Operación

    MODEL QTXN110HL Page 10 OPERACIÓN Antes de usar el calentador, asegúrese de que esté instalado ad- ecuadamente, de acuerdo con los pasos de instalación indicados en “INSTALACION” en la página 6. Utilice un control de 4 funciones para operar el calefactor, el ventilador, la luz y la luz nocturna por separado.
  • Página 11: Maintenimiento

    INCLUYENDO, PERO NO LIMITADAS A, GARANTIAS IMPLICITAS DE COMERCIALIZACION O APTITUD PARA UN PROPOSITO PARTICULAR. Durante el período de tres años, y a su propio criterio, Broan-NuTone reparará o reemplazará, sin costo alguno cualquier producto o pieza que se encuentre defectuosa bajo condiciones normales de servicio y uso.
  • Página 12: Piezas De Repuesto

    MODELO QTXN110HL Página 12 PIEZAS DE REPUESTO Clave No. Pieza No. Descripción 97016470 Cubierta 98007763 Ranura de deslizamiento (se req. 2) 98003036 Ángulo de soporte (se req. 4) 97016450 Conector del conducto 99170245 Tornillo, #8-18 x 0.375 (se req. 8) 93260454 Tuerca de chapa #8-18 (División) (se req.

Este manual también es adecuado para:

Qtxn110hl

Tabla de contenido