Notes - claber 8488 Manual De Instrucciones

Notes

• When the back-light of the dispay is off, it can be switched on simply
by pressing any one of the buttons.
• The buttons can be used to program the timer only when the back-
light is on (programming enabled).
• The back-light display will go dark automatically after 30 seconds if
no buttons are pressed, to prolong the life of the batteries.
A
m
h
B
h
• At time of programming the timer automatically sets itself on a clock
based on the watering frequency selected.
• Programs can be set to operate in a SEQUENTIAL or OVERLAP mode.
By changing the mode after programs have been entered, the mode
selected will be kept but not the programs previously set
tion of Sequential/Overlap Mode on page
A
h
B
x 1
Programming
enabled
A
m
30
B
h
sec.
13).
US
m
h
h
(see Selec-
9