Electric Specifications; Maintenance - Minipa MDR-611 Manual De Instruccion

B. Electric Specifications
Accuracy valid for environment of 20°C±1.5°C, 40%<RH<60%.
• Resistance range: 1Ω until 1111.11kΩ.
Range
Ω
x1
Ω
x10
Ω
100
Ω
1k
Ω
10k
Ω
100k
• Maximum Input Power: 0.2W.
• Residual Resistance: 25±5mΩ.
• Insulation Resistance: 500MΩ /500VDC between panel and
circuit.

5) MAINTENANCE

Before use the decade, turn each rotary switches, to verify the
contact is correct.
The accuracy of resistor is only specified until the connector.
Observe the resistance of the wires used to interconnect the
resistance to the circuit, and subtract the value of wire resis-
tance from the value to be adjusted.
For measurements of low resistance, use meters that make
measurements of resistance with four wires.
Accuracy
±0.5%
±0.1%
±0.1%
±0.1%
±0.1%
±0.2%
10
Maximum Current
450mA
140mA
45mA
14mA
4.5mA
1.4mA