Controls Overview - DJ-Tech Vinyl USB 5 Manual De Incio Rápido Del Usuarío

CHANGING THE SPEED
As long as the pitch control is in center "detent" click position, the turntable is operated at selected speed.
The speed can be increased or decreased by 10% by the pitch control.
An incorrect adjustment done on purpose can also be used to have the turntable rotate extremely slow or fast.
The strobe dots at the edge of the turntable are used for speed monitoring.
MAINTENANCE
Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it with a new one.
Volatile materials should not be used, such as: alcohol, thinner, benzine etc. They may remove the paint or damage the
luster.

CONTROLS OVERVIEW

1
2
3
4
5
6
7
1. 45-rpm Adaptor
This adapter allows you to play standard 7" EP vinyl
records with large center holes. Place the adapter on
the CENTER SPINDLE 7" records.
2. Turntable Platter
This platter connects directly to the center spindle. The
platter and center spindle holds a vinyl record perfectly
center. The platter also spins the record at a consistent
speed.
20 21 22
9
8
3. Strobe Indicators
The PLATTER has four rows of indicators. These
indicators are used to visually detail various stages of
pitch. The indicators are illuminated by the STROBE
INDICATOR PILOT LAMP. Each row may appear to
stand still at different pitch levels.
Note: The use of heavy fluorescent lighting directly
above the turntable will defeat the STROBE LAMP
PILOT LAMP affect indicator accuracy.
5
11 12
10
19
18
17
16
15
14
13