Using The Cooktop/Countertop; Setting The Clock - Kenmore ULTRA WAVE 665.61652 Guía De Uso Y Cuidado

USING THE COOKTOP/COUNTERTOP LIGHT
The pad on the bottom right of the control panel
controls the cooktop/countertop light.
1. Turn on light.
TOUCH
O
m
(once for regular light, twice for night light)
2. Turn off light when desired.
TOUCH
O
m
(1 or 2 times, depending on light setting)
SETTING THE CLOCK
When your microwave oven is first plugged in, or
after a power failure, the display will flash ":". If a
time of clay is not set, ":" will flash until you touch
any pad.
1. Touch 0.
NOTES:
,,' If you touch in an invalid time and touch (_),
3 tones will sound. Enter the correct time.
,,' If you touch OFF/CANCEL while setting the clock,
the display will show the last time of day set.
• To turn off the clock, touch (_), Number pad 0,
and 1_) again. The set time will disappear and ":"
will show on the display.
TOUCH
G
YOU SEE
2. Enter the time of day.
Example for 12:00:
TOUCH
G
O
G
G
YOU SEE
3. Complete your entry. TOUCH
G
OR
YOU SEE
14