Troubleshooting; Technical Data - Cramer 2900486 Manual De Instrucciones

EN
WARNING!
To avoid serious personal injury, always remove the battery
pack from the tool when cleaning or performing any
maintenance.
Cleaning
Wipe the outside of the charger with a dry, soft cloth. Do not hose
down or wash with water.
Storage
Always remove the battery pack before storing the charger or any time
the charger is unplugged.

Troubleshooting

PROBLEM POSSIBLE CAUSE
Battery pack
Charger doesn't or charger is
work. Charger defective or
shows defective bad connection
mode (LED flashes between the
Red). battery pack and
charger.
6
cramer.eu
SOLUTION
Try to remove and
reconnect the battery pack
and the charger.
Try charging a different
battery pack.
Unplug the charger and
wait until the red LED goes
out, then reconnect the
plug to the power supply.
PROBLEM POSSIBLE CAUSE
Charger doesn't
work. Charger
shows evaluation Battery pack is too
mode (LED hot or too cold.
indicates Red solid
ON).

Technical Data

PROPERTY
Model 82C2
Charger 82V charger
Input
230V
Output 82V
SOLUTION
Allow the battery pack to
reach normal temperature.
Charging will begin when
battery pack returns to
3°C-47°C (37°F-117°F).
VALUE
50/60Hz, 2.5A
4A