Adjusting The Picture; Advanced Functions; Adjusting The Sound - James F338 Manual De Funcionamiento

Chapter 3

Adjusting the Picture

The menus for adjusting the picture are used to obtain the
best picture setting according to your preference, the type
of programme you are watching and the ambient lighting.
Display the menu by pressing the Menu button. Press the
left or right direction button to select the Picture icon and
press the up or down direction or OK button to display
the Picture menu. The Picture options are as below:
Picture
BackLight
Picture Mode
Scale
Brightness
Contrast
Saturation
Sharpness
Tint
Color Temperature
Natural Light
Dyanmic Contrast
Note: Some options may be not available for certain
signal sources.
Back Light: this option can be used to adjust the
brightness of the backlight, depending on room lighting.
Use the left or right direction button to adjust.
Picture Mode: use the right direction or OK
display the selectable options, then press the up or down
direction button to scroll through the picture preset settings:
Standard, Bright, Soft or Personal and press OK to confirm.
Note: When selecting Standard, Bright, Soft, the Back
Light will restore to the defaulted setting in factory. You
are recommended to use the Bright mode for vivid palette.
Scale: use the right direction or OK
the selectable options, then press the up or down direction
button to scroll through the picture size: 4:3, Full,
Wide, Original and Nature, (Note: some options may be
not selectable for certain signal sources.) and press OK
to confirm.
Note: You are recommended to use the full screen mode.
Do not use the display mode with black bands on both
sides of the picture (such as 4:3) for long
time, otherwise the TV screen may be damaged
permanently.
Brightness: adjusts the brightness of the picture.
Contrast: adjusts the difference between the light and
dark areas of the picture.
Saturation : adjusts the richness of color.
Sharpness: adjusts the crispness of the edges in the
picture.
Tint adjusts the balance between the red and green
levels.
Color Temperature: adjusts the color temperature of
the picture. use the
the selectable options, then press the up or down
direction button to scroll
for a more blue palette of picture colors; Normal; and
100
Warm for a more red palette of picture colors
Standard
Full
Natural Light : turns on this option to adjust the
50
50 brightness of the backlight according to the content of the
50
inputted signal automatically, so as to optimize the picture
50
quality and decrease the power consumption.
0
Normal
Dynamic Contrast
Off
contrast automatically.
Off
Press Menu to return or Exit to close the menu.

Adjusting the Sound

Display the menu by pressing the Menu button. Press
the left or right direction button to select the Sound icon
and press the
the Sound menu. The Sound options are as below:
button to
,
button to display
Sound Mode: use the
display the selectable options, then press the up or down
Subtitle ,
direction button to scroll
Stereo, Music, News, Movie and Personal.
Balance: use the
the sound between the left and right speakers.
Sound EQ: adjusts the audio frequency settings. Select
the Sound EQ option, then press the right direction or OK
button to enter, then press the up or down direction button
to select an option and press the left or right direction
button to adjust.
Press Menu to return or Exit to close the menu.
9

Advanced Functions

:
Note: Tint is available to be adjusted only when the
system of the video signal is NTSC.
right direction or OK
through
: turns on this option to adjust the
up or down direction or OK button to display
Sound Mode
Balance
Sound EQ
MTS
right direction or OK
through the sound preset settings:
left or right direction button to balance
Note: if The Sound EQ is adjusted, the Sound Mode
will automatically switch to Personal.
button to display
the color settings: Cool
.
Sound
Stereo
0
Mono
button to