auna multimedia ScreenStar Manual De Instrucciones página 24

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ECHO: Rotate to adjust the reverb effect for the mic'ed voice.
AVC (Automatic Voice Control): Can be activated and adjusted by the AVC control knob. The vocals
on the Multiplex recording will be muted when the singer starts to sing through the microphone. When
the singer stops singing, the vocals will resume to normal.
Master / MIC Volume: Rotate to set the levels of microphones and the master volume.
Video Source: The MONITOR SELECTOR is used to switch bewteen song lyrics or the camera image to
an attached TV screen & the built-in TFT screen. Set the selector to
CAMERA, to send lyrics to an attached TV screen and camera image on the built-in TFT screen.
CDG, for lyrics on the built-in TFT screen and the camera image on an attached TV screen.
OFF, to disable the built-in TFT screen.
Recording: Vocals (AUDIO) -> USB .MP3 & .CDG
You can record CD+G lyrics and music together with the singer's voice to a USB flash drive. The recor-
ding will be in MP3+G format. There will be one MP3 & one CDG files generated after recording.
Plug a USB flash drive to USB socket.
Start the desired track to play on CD/CD+G disc by pressing
Press USB RECORD button to record the CD/CD+G playback together with your voice. (The per-
centage of completion will be displayed.)
Press USB RECORD again to stop recording.
Recording: Vocals and Performance (VIDEO+AUDIO) -> SD .AVI
You can record your performance in front of camera with CDG music to a SD card. The recording will
be in AVI format:
Remove colour camera cover from the camera lens. Insert a SD card into SD card slot.
Make sure that you are in CDG mode. If you are not, toggle FUNCTION button to go to CDG
mode. You will see total number of tracks shown on LED display if you placed a disc inside the
CD compartment.
Press PLAY to start playback CDG disc.
If you set MONITOR SELECTOR to CAMERA position. You will see the camera image on the TFT
monitor while CDG lyrics will be shown on your TV.
Press SD CARD RECORD button to start recording. You will see a red dot displaying on the TFT
monitor, which means it is recording.
You can start to sing following with CDG lyrics shown on TV. Make sure you appear in the TFT
monitor so that your performance will be recorded into the SD card.
When you finish press SD CARD RECORD button again to stop recording.
To playback the recording, please follow instructions in CAMERA OPERATION.
24
Recording Audio and Video
/
and
to start.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

10029142100291431002935710029358

Tabla de contenido