Charging The Battery - SOUND2GO BRIQ Studio Manual De Instrucciones

EN
(see illustration back cover page)
Turn off the device.
‹
Connect the included recharger cable to the charger connection (7) of the device.
‹
Connect the recharger cable to a free USB port of a computer or to a suited USB charger (max. input
‹
voltage 5V).
During the loading process, the indicator lamp (6) flashes red. After termination of the loading process the
indicator lamp goes out.
for total battery volume.
40
Operation

Charging the battery

You will hear continuous tick sound when low power.Three hours charging time are needed