Setting The Clock Time - Amano TCX-22 Operación Manual

Setting the Clock Time

Note: Use a 24 hour and 60 minute format when setting the time. For
example, 2:00 PM = 14:00.
1. When the display flashes P2 CLoc, press the ENTER
button.
2. Press the CHANGE button until the correct hour
appears, then press the ENTER button.
3. Press the CHANGE button until the correct minute
appears, then press the ENTER button.
4. When the display flashes the correct time, press the
ENTER button.
5. When the display flashes P2 CLoc, press the
CHANGE button to move to the Daylight Saving
Time On/Off Setting.
Disabling/Enabling Daylight Saving Time (DST)
Note: When this setting is set to ON, the clock's time will automatically
change for DST. When this setting is set to OFF, the clock's time will not
change for DST. The dates to begin and end DST are set in the Other
Options Menu (See Page 14).
1. When the display flashes P3 dLS , press the ENTER
button.
2. Press the CHANGE button to alternate between On
and Off.
3. When the display flashes the correct setting, press
the ENTER button.
4. When the display flashes P3 dLS , press the
CHANGE button to move to the Quick Set-Up Code
setting.
TCX-22
Page 7
Amano Cincinnati, Inc.