Changing The Paper Type In The Setup Menu; Loading Paper; Fanfold Paper - MPI DASCOM Tally LA550 Guia De Instalacion

Quick Start-en.book Seite 16 Dienstag, 22. Juni 2004 1:33 13
Paper handling
Changing the paper type in the
Setup menu

Loading paper

Fanfold paper

16
Mantenimiento Periféricos Informaticos C/Canteras, 15 28860 Paracauellos de Jarama (Madrid) Tel: 00 34 917481604 Web: https://mpi.com.es/
When you want to change the paper source in the Setup menu, proceed as follows:
Press the Setup key, then the Paprpath key (3).
Select the desired paper path by pressing < (2) or > (3).
Confirm the selection by pressing the Set key (1).
Your printer can process both fanfold paper and single sheets. For information on
the supported paper sizes, please refer to page 30 ("Paper specifications").
Only use dust-free or low-dust paper. Many paper qualities are suitable for this
printer. For more information, please refer to the User guide on the Online CD-
ROM.
Raise the front cover, taking it by the areas marked with ar-
rows on the left and right.
Open the right and left tractor flaps.
You may also want to remove the bottom cover in order to
facilitate loading the fanfold paper. However, you can also
feed paper to the tractor with the bottom cover mounted.
Quick start guide