Section 5 - Troubleshooting - Drive Medquip MQ5800 Manual De Instrucciones

DO NOT use cotton or any other material.
DO NOT wash or clean the filter.
Use only Drive filters.
DO NOT operate unit without an air filter.
SECTION 5 – TROUBLESHOOTING
PROBLEM
Device does not
switch ON.
Device does not
nebulize, or it
nebulizes weakly.
CAUTION
1. Make sure the plug is firmly fitted to the
wall socket.
2. Try plugging into another wall socket
that is known to work.
3. Contact your Drive representative.
1. Make sure that the ends of the air tubing
are fitted tightly onto the main unit and
onto the nebulizer.
2. Check whether the nebulizer is empty
of medication or has too much medication
(MAX 8ml).
3. Check whether the nebulizer nozzle is
obstructed.
4. Check whether the funnel is inserted.
If these possible solutions DO NOT work,
contact your medical dealer.
SOLUTION
English 13