AquaPRO 55011-7 Manual Del Usuario página 4

INSTALLATION
(SEE FIGURES 1 AND 2)
WARNING: Electric Shock Hazard. Plug pump into a properly grounded, GFCI protected outlet. Do NOT plug in
the pump until after it is completely installed. Do not remove or modify the grounding pins on the plugs.
Figure 1: Typical method of mounting the pump
Fittings Supplied:
A Sink Drain Screen
B 1-1/4" NPT x 1-1/4" Slip Check Valve
C 1-1/4" NPT Ball Valve
Purchase Separately:
1 1-1/2" NPT x 1-1/2" Slip Female Adapter
2 1-1/2" Schedule 40 PVC Pipe, to fit
3 1-1/2" NPT x 1-1/2" Slip Male Adapter
4 1-1/4" NPT Galvanized Nipple (to fit)
5 1-1/4" NPT Galvanized Union
6 1-1/4" NPT x 1-1/4" Male Adapter
7 1-1/4" Schedule 40 PVC Pipe, to fit
8 1-1/4" Socket to Socket 90° Elbow
9 1-1/4" Schedule 40 PVC Pipe to Drain
PVC Pipe Cement
PTFE pipe thread sealant tape
1-1/2" PVC Solvent Union – optional
NOTE: Be careful to avoid cross-threading; Use only a
plastic-compatible pipe-threading compound or teflon
tape when connecting threaded fittings to plastic
adapters.
4
Qty.
1
1
1
Qty.
1
1
1
1
1
1
1
1
As Needed
As Needed
As Needed
As Needed