Watching A Tv Program; Selecting The Picture Mode - Insignia IS-TV040928 Guia Del Usuario

Watching a TV program

To watch a TV program when your HD-Ready TV is connected to an
outside antenna or to cable TV without a converter box:
1 Turn on your HD-Ready TV.
2 Press the CH + or CH – button to tune to a channel.
Or
If you want to direct tune a channel:
•
•
•
Or
If you want to scan for a channel, press the SCAN button. Your
HD-Ready TV scans all channels one by one. Each channel
appears for a few seconds. When you see a channel you want to
watch, press the SCAN button.
To watch a TV program when your HD-Ready TV is connected to a cable
TV converter box or satellite box:
1 Turn on your HD-Ready TV.
2 Set your HD-Ready TV to the output channel of the converter box
or satellite box (usually 3 or 4).
3 Use the converter box or satellite box to select channels.

Selecting the picture mode

You can select a picture mode to improve the video display. Each
picture mode has its own picture settings such as color, brightness,
contrast, sharpness, and tint.
To select the picture mode:
• Press the PICTURE button one or more times to cycle through the
available picture modes. You can select:
•
•
•
•
22
For a one-digit channel number, press the
appears, then press the number button for the channel.
For a two-digit channel number, press the
appears, then press the number buttons for the channel.
For a three-digit channel number, press the
--- appears, then press the number buttons for the channel.
Movie–select for finely detailed images.
Standard–select for most TV programs
Sport–select for bright images.
Personal–when you make adjustments to the picture
settings in the OSD, these settings are stored in the
Personal picture mode.
www.insignia-products.com
IS-TV040928 27" HD-Ready TV
–
/-- button until –
–
/-- button until --
–
/-- button until