D-Link DSL-2750U Guía De Instalación Rápida página 4

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 12
TROUBLESHOOTING
SETUP AND CONFIGURATION PROBLEMS
SET-UP AND CONFIGURATION PROBLEMS
1. HOW DO I CONFIGURE MY DSL-2750U ROUTER WITHOUT THE CD, OR CHECK MY
WIRELESS NETWORK NAME (SSID) AND WIRELESS ENCRYPTION KEY?
- connect your pc to the router using an ethernet cable.
- Open a web browser and enter the address http://192.168.1.1
- the default username is admin. the default password is admin.
- If you have changed the password and can not remember it, you will need to reset the router to
set the password back to admin.
2. HOW DO I RESET MY DSL-2750U ROUTER TO FACTORY DEFAULT SETTINGS?
- ensure the router is powered on.
- press and hold the reset button on the rear of the device for 10 seconds.
note: Resetting the router to factory default will erase the current configuration settings. to re-
configure your settings, log into the router as outlined in question 1, then run the setup Wizard.
3. WHY CAN I NOT GET AN INTERNET CONNECTION?
- For adsl users please contact your Isp to make sure the service has been enabled/connected
by your Isp and that your Isp username and password is correct.
4
DSL-2750U

Publicidad

Tabla de contenido
loading

Tabla de contenido