Manual Setup Of The Sagem Fax Ata 101S - Sagem FAX ATA 101S Guia Del Usuario

Sagem_Fax_ATA101S.book Page 4 Jeudi, 21. février 2008 5:09 17
3. Access the setup interface of your Sagem Fax ATA 101S using
your Internet browser
192.168.134.1, then enter the required access codes.
You can use the following default access codes:
• User name:
• Password:
You can then assign an IP address (fixed or dynamic via a DHCP
server) to the Sagem Fax ATA 101S WAN port via the Web setup
interface.

Manual setup of the Sagem Fax ATA 101S

Step 1 - Basic > LAN/WAN Setup menu
eth0 setting
These settings do not need to be changed as they are the
settings of the Sagem Fax ATA 101S "LAN" interface, i.e. the
interface that allows you to access the ATA unit setup interface.
4
by entering the
user
user
Sagem Fax ATA 101S
address http://