SISER CP912-120 Manual De Operador página 4

Printing with your Craft Press
0 8
-
88 0 4
MODE +
Once the Craft Press has reached the designated
temperature, position the garment.
Align the transfer material on the garment to be
printed and cover with a cover sheet.
Lower and lock the heat platen into the press position.
The automatic timing process will start.
TEMP
The timer will count down and audibly signal you to
SET
lift the heat platen into the UP position when the press
TIME
cycle is complete. The time will automatically reset and
you are ready to continue with the next application.
En