LG Spectrum Manual Del Usuario página 49

If Autorun doesn't function properly, unplug and plug the USB Cable to set Mass
●
storage mode.
Autorun automatically installs the USB device driver for every USB mode.
Internet connection mode
Autorun may automatically use Internet connection mode in certain
circumstances.
# Autorun automatically switches to Internet connection mode if the
connection fails while syncing or connecting.
You can share your phone's internet connection with your PC using a USB
cable. After connecting with a USB cable, set the USB connection mode to
Internet connection. Then select between Ethernet and Modem.
# Ethernet This mode changes the phone to USB tethering mode from
the PC. Touch Setting > Wireless & Networks > Tethering > Mobile
Broadband Connection as USB Tethering
NOTE This mode can only be used by Tethering registered user.
# Modem This mode changes the phone to Modem mode from the PC.
Always ask
You can choose to be asked to confirm the USB connection when
connecting to a computer.
When Always ask is checkmarked, the USB selection window is displayed.
Autorun is not available when:
# Phone is booting (powering up).
# PC operating system is not set to Autorun (automatic execute command).
To change the setting while Autorun is running:
You can change the settings while Autorun is running. Touch the Apps Key
> Settings > Connectivity > Default connection mode > Mass storage.
NOTE Be sure to checkmark the box Always ask if you want to be asked to confirm the USB
connection mode when the phone is connected to a computer.
Connecting to Networks and Devices
47