Accessories; Storage - Hydac OK-EL Serie Instalación, Funcionamiento Y Manual De Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Filter side
ACAF, OKAF, SCAF, OSCAF coolers are fitted with an oil-filter element.
Its contamination must be monitored. Please refer to the oil-filter
instruction manual for cleaning and changing instructions.

12. ACCESSORIES

On customer request, various accessories (e.g. AITR, AITF, AITF RS,
AITF RE, AITF SS, IBP/IBT, FU, GP, ESC, EL.BOX) can be mounted
on HYDAC coolers.
For further technical details and available accessories, for each cooler
type, please refer to our Accessories Catalogue, available on request.

13. STORAGE

HYDAC coolers must be stored in dry conditions (constant temperature
and constant humidity).
Fluctuations in temperature from cold to warm and vice versa must be
avoided. This may result in condensation and cause potential corrosion
problems.
When storing for less than one year, we recommend flushing inside the
cooling element with a suitable preserving fluid which is compatible with
aluminum (see §10). Take into account the intended operating fluid.
Always seal the ports.
When storing for more than one year, HYDAC recommends filling the
cooler with a preserving fluid and sealing the ports. The preserving fluid
(see §10) must be removed completely before using the cooler again.
If necessary use a suitable cleaning agent.
Table 1: Max. permitted torque rating
on the threaded connections
Thread Type
¼" G
½" G
¾" G
1" G
1¼" G
1½" G
2" G
M6 x 1,0
M8 x 1,0
M10 x 1,0
M12 x 1,5
M14 x 1,5
M22 x 1,5
Torque [Nm]
40
100
140
220
300
340
440
10
20
20
30
50
150
23

Publicidad

Tabla de contenido
loading

Tabla de contenido