MYDLINK DCS-8000LHV2 Guia De Instalacion página 9

Mounting
4
/
5
/
6
/
DCS-8000LHV2
Place the camera into the
mount, ensuring that the
power port in the back
is exposed. Plug the USB
power cable into the camera
ensuring it is plugged in all
the way.
Align the slash markings
on the camera mount and
baseplate. Press the camera
mount onto the baseplate.
Twist the camera mount
slightly to the right to
lock it onto the baseplate.
Adjust the camera angle,
then tighten the screw on
the left to lock it in place.
9