Cleaning And Maintenance; Technical Specifications - Toolland TM76075 Manual Del Usuario

4. Features
 non self-priming pump
 PVC pistol
5. Installation
 Place the pump in a safe, dry and well-ventilated place. Install the pump on a flat and stable surface.
 Bleed the system before switching on the device.
Loosen the bleeding valve.
o
Fill the pump casing and suction hose with diesel until the bleeding valve runs over.
o
Carefully tighten the bleeding valve.
o
 Always check the airtightness of the pump and suction hose. The device will not be able to pump up diesel
if there are air bubbles in the system. It is therefore important to bleed the device before using it.
6.

Cleaning and Maintenance

 Always disconnect the device from the mains before cleaning.
 Never clean the device with water, but use a damp cloth instead.
 Do not use harsh chemicals, cleaning solvents or strong detergents to clean the device.
 Use a soft brush to remove the dust from the ventilation openings.
7.

Technical Specifications

power ......................................................................................................................... 400 W
max. pump rate ..................................................................................................... 32 L / min.
max. suction height .......................................................................................................... 7 m
cable ........................................................................................ H07RN-F3G x 1.0 mm² / 1.2 m
speed ..................................................................................................................... 2800 rpm
press ......................................................................................................................... 3.4 bar
power supply .................................................................................................... 230 V~, 50 Hz
pressure hose length ........................................................................................................ 4 m
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 09/11/2015
TM76075
4 ©Velleman nv