Power Saving Features; Battery Installation; Hardware Installation; Trouble Shooting - GE 98765 Manual De Instrucciones

Power Saving Features

Power Saving Features
• Your mouse can be turned off to conserve the battery when not
in use. The on/off switch is located on the bottom of the mouse.
• Your mouse can be turned off to conserve the battery when not
• The mouse will go to sleep when idle for a long period of time to save in use. The on/off switch is located on the bottom of the mouse.
batteries. To wake the mouse, Simply move it and it will wake up.
• The mouse will go to sleep when idle for a long period of time to save
batteries. To wake the mouse, Simply move it and it will wake up.

Battery Installation

Battery Installation
1) Slide the top corner of the mouse off to open the battery
Battery Installation
1) Open the battery compartment on the bottom of the mouse. Insert
compartment. Insert 2 AAA batteries, being sure to match the
2 AAA batteries, being sure to match the polarity of the batteries
1) Open the battery compartment on the bottom of the mouse. Insert
polarity of the batteries with the polarity markings inside the
with the polarity markings inside the battery compartment.
2 AAA batteries, being sure to match the polarity of the batteries
battery compartment.
2) Replace the battery compartment cover. with the polarity markings inside the battery compartment.
2) Replace the battery compartment cover.
2) Replace the battery compartment cover.

Hardware Installation

Hardware Installation
Please keep these directions in a safe place.
1) Insert the enclosed batteries into the battery compartment of
Please keep these directions in a safe place.
1) Insert the enclosed batteries into the battery compartment of your mouse.
2) Make sure your mouse is on. There is an on/off switch located on
your mouse.
2) Make sure your mouse is on. There is an on/off switch located on the bottom of your mouse.
3) Plug the Laser Mini Mouse Nano receiver into an available USB port
the bottom of your mouse.
on your computer or USB hub, wait a few seconds.
3) Plug the Laser Mini Mouse Nano receiver into an available USB port
4) Your mouse should now function normally. Move your mouse to
on your computer or USB hub, wait a few seconds.
test functionality.
4) Your mouse should now function normally. Move your mouse to
*When traveling receiver can be stored magnetically in the bottom test functionality.
of the mouse
*When traveling receiver can be stored magnetically in the bottom
of the mouse

Trouble Shooting

• Mouse does not work properly
Trouble Shooting
• Mouse does not work properly
- If your mouse has been idle for a period of time it may be asleep to
conserve battery power. Press the left mouse button to wake it.
- If your mouse has been idle for a period of time it may be asleep to
conserve battery power. Press the left mouse button to wake it.
• Mouse will not move
• Mouse will not move
- Make sure you have installed all updates to your operating system.
- Press your left mouse button to wake your mouse.
- Make sure you have installed all updates to your operating system.
- Change the batteries on your mouse.
- Press your left mouse button to wake your mouse.
- Change the batteries on your mouse.
3