Additional Safety Warnings - Stanley STHV215BW Manual De Instrucciones

• This product includes rechargeable
lithium-ion batteries. Do not incinerate
batteries as they will explode at high
temperatures.

ADDITIONAL SAFETY WARNINGS

a) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to battery pack, picking up
or carrying the appliance. Carrying the
appliance with your finger on the switch
or energizing appliance that have the
switch on invites accidents.
b) Recharge only with the charger
specified by the manufacturer. A
charger that is suitable for one type of
battery pack may create a risk of fire
when used with another battery pack.
c) Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If contact accidentally occurs,
flush with water. If liquid contacts
eyes, additionally seek medical help.
Liquid ejected from the battery may
cause irritation or burns.
d) Do not use a battery pack or appliance
that is damaged or modified. Damaged
or modified batteries may exhibit
unpredictable behavior resulting in fire,
explosion or risk of injury.
e) Do not expose a battery pack or
appliance to fire or excessive
temperature. Exposure to fire or
temperature above 266°F (130°C) may
cause explosion.
f) Have servicing performed by a qualified
repair person using only identical
replacement parts. This will ensure that
the safety of the product is maintained.
WARNING:
or repair the appliance.
SAVE THESE INSTRUCTIONS
Symbols
• The label on your tool may include the
following symbols. The symbols and their
definitions are as follows:
V ..............................
volts
A .................................. amperes
Hz ................................ hertz
W ................................. watts
min ............................. minutes
or AC ................ alternating current
or DC .......... direct current
n o ............................... no load speed
.............................. class I construction
(grounded)
............................... earthing terminal
............................. safety alert symbol
.............................. class II construction
Do not attempt to modify
(double insulated)
.../min or rpm. revolutions or reciprocation
per minute
Wh .............................. watt hours
FUCTIONAL DESCRIPTION
1. On/Off Switch
2. Dust Bin Release Button
3. Dust Bin
4. Charger
5. Charging Bracket
6. Wet/Dry Filter
7. Wet/Dry Foam Insert
8. Squeegee Tool Adapter
3
6
Wall Mounting - Figure A
The product can be attached to a wall to
provide a convenient storage and charging
point for the appliance. When mounting to
a wall, make sure the mounting method is
suitable for the wall type and is appropriate
to the weight of the appliance.
• Mark the location of the charger bracket
(5) screw holes on the wall (within reach
of an electrical outlet for charging the
vacuum while it is on the wall bracket).
• Fix the mounting bracket to the wall using
appropriate screws and plugs for the type
of wall, and weight of the appliance.
• Hang the appliance by placing the
opening of the vacuum base over the
hooks in the wall mount charging bracket.
A
3
1
2
8
7
5
4