Pairing A Bluetooth Device - Denon Professional DN-410X Guia Del Usuario

Operation

Pairing a Bluetooth Device

You can play audio from an audio device that sends its signal over a Bluetooth connection
(e.g., smartphones, tablet computers, etc.). DN-410X uses Bluetooth 3.0 and has a
transmission range up to 100 feet (30.5 meters).
Once you "pair" your Bluetooth device with DN-410X, they are "connected" wirelessly. You
can play audio on your Bluetooth device, and it will be sent out of DN-410X's outputs
(balanced and unbalanced).
Important:
•
DN-410X will not receive audio from a phone call. While using it, we recommend disabling
your cellular connection, if possible.
•
Do not use DN-410X near a microwave oven, which can interfere with the reception.
To pair your Bluetooth device to DN-410X:
1. Turn on your Bluetooth device.
2. Power on DN-410X.
3. Press the Pair/Unpair button on DN-410X.
Note: You can pair with an iPhone, iPad, Android device, or other smartphone, tablet, or
computer equipped with Bluetooth that supports A2DP. Android users should consider
updating their OS if experiencing trouble with pairing or playing music.
4. Navigate to your Bluetooth device's setup screen, find DN-410X and connect.
DN-410X's pairing LED will light up solid when it is paired.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
Note: If your Bluetooth device is not able to pair to the mixer, press the Pair/Unpair
button on the mixer to break previous Bluetooth connections and reset the Bluetooth
module.
To disconnect pairing, press the Pair/Unpair button on DN-410X.
Multitrack Audio Recording
The Insert jack can also be used as a direct output to a multitrack recorder. The "send"
provides the cleanest mic preamp signal by sending the signal to the recorder prior to it
reaching the mixer's EQ and channel fader. Use a standard TRS cable and insert the plug on
the mixer's side only until the first "click" (the ring connector). This will send the preamp signal
to the recorder without interrupting the normal signal flow through the mixer.
Insert: to DN-410X's
Insert jack.
8
Send: to your external
device's input.
Return: from your
external device's
output.