Operating Modes; Adjusting The Temperature - Haverland i2Control Manual De Instalacion Y Uso

NOTE: Factory-set parameters:
1) Cloak and current day are factory set.
2) Comfort temperature = 20 ºC.
3) Economy temperature = 16 ºC
4) Activated operating mode = "Learning" mode.
5) Activated working profile in "Learning" Mode =
Economic Profile "PE"

3.2 Operating modes

Your heater incorporates four operating modes. The
"learning" mode is activated at the factory. To change
the operating mode:
Simultaneously press
you want to change the operating mode.
Light indicator 3 will change:
1) "Learning" mode: "slowly flashing" light.
2) Manual mode: light is OFF.
3) Sensor mode: fixed light.
4) "Forced" programming mode (via Smartbox
App (not included)).
1) LEARNING MODE (factory activated):
During seven days and CONTINUALLY, week by
week, your heater will be learning your life style.
The Wi emitter has 2 working profiles:
* Economic Profile "PE" (Default factory settings)
This profile prioritizes the energy savings.
1) If there is detection:
2) If there is no detection:
Economy mode.
3) If there is no detection:
Anti-frost mode.
Page 32
and every time
3
Comfort mode.
> 30 minutes =
> 12 hours =
* Comfort profile "PC":
This profile prioritizes comfort and welfare.
1) If there is detection:
2) If there is no detection:
Economy mode.
3) If there is no detection:
Anti-frost mode.
Day by day, the Smart wave is "learning" the
presence (comfort) periods and the absence
periods (economy).
After 7 days, the radiator will start working according
to the programmed presence periods (comfort) and
the absent periods (economy), depending on the
chosen working profile.
The comfort periods in the following week will
commence before the programmed time so that the
room will be warming up before you enter (adaptive
start control).
Note: The auto-programming period is
continuous. The Wi updates according to your life
style variations, day by day, week by week.
2) SENSOR MODE :
1) If there is detection:
2) If there is no detection:
Economy mode.
The thermostat does NOT hold anything in
memory.
3) MANUAL MODE :
In this mode, you decide when you want Comfort
temperature, Economy temperature or Anti-frost
temperature.
When Manual mode is selected, you only have to
choose Comfort, Anti-frost or Economy and the
desired ambient temperature.

3.3 Adjusting the temperature

In order to change the Comfort and Economy
temperatures the heater must be in MANUAL mode
(see point 3.2).
The factory-set temperatures are:
1) COMFORT TEMPERATURE = 20 ºC
2) ECONOMY TEMPERATURE = 16 ºC
3) ANTI-FROST TEMPERATURE = 7 º C
Comfort mode.
> 30 minutes =
> 16 hours =
Comfort mode.
> 30 minutes =