Instrument Configuration - Promax SKYHUNTER Manual De Instrucciones

4.3 Instrument Configuration

The various parameters and information stored in the SKYHUNTER may be
modified by entering the Service Mode and using the SH.EXE PC program. This
program is supplied with the instrument (RM-001).
The instrument allows you to define the number of measuring points (up to 16), the
different parameters for each point (frequency, signal characteristics, LNB voltage, etc.)
and the text messages shown on the display, among others.
To enter the Service Mode start up the instrument by simultaneously pressing keys
[1] and [3].
All the necessary information for configuring the instrument and using the SH.EXE
configuration and control program can be found in the manual accompanying the
program.
To switch off the instrument, as in the normal operating mode, simply press any of
the three instrument keys (
Page 20
[1], [2] or [3]) for more than 2 s.
USER'S MANUAL SKYHUNTER.
07/2006