Dmx Linking - Chauvet Professional Ovation E-260WW Manual Del Usuario

AC Plug
Connection
AC Live
AC Neutral
AC Ground
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.

DMX Linking

The Ovation E-260WW will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.
DMX Connection
The Ovation E-260WW uses a 3- or 5-pin DMX data connection for its DMX personalities: 1 Ch, 2 Ch, 3 Ch, and 6 Ch.
See the User Manual for information about connecting and configuring the product for DMX operation.
Master/Slave Connection
The Ovation E-260WW uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation E-260WW supports RDM protocol that allows feedback to make changes to menu map
options. Download the User Manual from
Mounting
Before mounting this product, read the
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Mounting Clamp
Ovation E-260WW QRG Rev. 7
QUICK REFERENCE GUIDE
Wire (U.S.)
Black
White
Green/Yellow
www.chauvetprofessional.com
Safety Notes. Use at least one mounting point per product. Make sure the
Safety Cable
Overhead Mounting
Wire (Europe)
Brown
Blue
Green/Yellow
for more details.
Alternate Yoke Attachment
Secure the safety cable
using the passageway on
the back of the product.
* Lens tubes sold separately
EN
Screw Color
Yellow/Brass
Silver
Green
2