Orbegozo HOR 200 A Manual De Instrucciones página 8

HOR 200 A
Overview of the Components
1 Glass door
2 Baking tin/grease pan
3 Temperature control lamp
4 Timer
INSTALLATION
This oven has not been designed to be built-in. Place the unit on a dry and smooth surface and make sure that
the oven is a miniumin 10 cm away from the wall at both sides and 20cm at the upper part . The back should be
placed against a wall. Do not place it close to a closet. Make sure the door can be completely open without
resistance.
Preliminary Operations
• Remove any packaging materials that may be present in the oven.
• Before initial use please operate the oven for 15 minutes to remove the protective coating on the heating
element. Please select dual operation.
• The presence of smoke is normal. Make sure that a sufficient level of ventilation is available.
Operation
1. The timer must be set to the "0" position.
2. Only connect the unit to a properly installed and earthed power socket (230
volts, 50 Hz).You can find the details on the type plate.
3. Put the items to be cooked into the oven.
5 Function switch
6 Temperature regulator
7 Grill grid
8 Crumb tray
8